feedback

Roller Shades Guide

measuring types | critical dimensions
cleaning and care


measuring types

tip-to-tip


Tip-to-Tip Measure is the common measure type for most roller shades. Choosing this measure type will include the headrail "pegs" that mount the shade to the wall or frame.

cloth-to-cloth


Cloth Measure is uncommon and should only be used for Outside Frame applications. The headrail is wider than the cloth of the shade which causes the "pegs" to extend beyond the width of the shade material. This total distance is 1-1/8" wide, or a gap of 9/16" on each side of the shade material.

NOTE: For outside mount applications allow the blind to overlap 1-1/2" to 3" on the sides, top and bottom of the window. You must add the overlap to your measurement; Levolor does not add width or height for overlap on Outside Mounted shades.



 
top
 



critical dimensions

cordloop

Cordloop length is 3/4 the length of the shade, unless otherwise specified.



specifications and deductions

Width Length Tolerances
Minimum Maximum Minimum Maximum Width Length
6" 144" 12" 120" 1/16" 1/2"


Fabric Width Reduction Control Options Universal Brackets Extension Brackets
1-1/16" (7/8" Control Side + 1/4" opposite side) Left or Right Yes 2-1/2"


mounting depths and deductions

  No Valance Standard Valance Small Cassette Large Cassette
Minimum Installation Depth 3" 3" 3" 3"
Flush Mount Installation Depth 3-1/2" 3-1/2" 3-3/4" 4-1/4"
Fabric Width Deductions 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Width Tolerances 1/16" 1/16" 1/16" 1/16"
Length Tolerances 1/2" 1/2" 1/2" 1/2"
Valance Height N/A 3-1/2" 2-1/2" 4"
Regular Bracket 1-1/2" 1-1/2" 1-1/2" 2-1/2"
Extension Bracket 2" 2" n/a n/a


 
top
 



recommended cleaning methods

Care Instructions
A brush-type vacuum attachment or feather duster should be used for cleaning. If your shade should become stained, you may clean it by dabbing the spot with a sponge dampened with lukewarm water. Avoid contact with window cleaning products as these may discolour your shade. Ultrasonic cleaning is not recommended or covered by our warranty.

Colour Variation and Fabric Repeat Information
colour lot variations may occur due to the process of colour application. For the best colour match, order all shades for a room at the same time. Pattern availability and colour lot match between orders cannot be assured. Any variation in colour is in accordance with industry standards.

 
top
 

 
close

We'd like to hear from you.

 

If you require immediate assistance or product support,
please contact our customer service department.