Everything you need to
know about Shutters

• How-to-Measure

  • 2 simple steps to get started

    Our instruction guides make it easy to take accurate measurements and get the right fit. To make it even easier, use the following tools:

    ---

    

    Step 1: Record your window measurements

    Step 1:

    Record your window measurements

    Review the instructions below for your specific product before measuring.

    

    Step 2: Get a metal tape measure

    Step 2

    Get a metal tape measure

    Carefully record your measurements to the nearest 1/8".

    

    Window Width:

    Measure the inside of the window opening, not the glass. Measure window width in 3 places. Record the shortest measurement and round down to the 1/8 inch. Do not make any deductions, allowances or additions.

    
    

    

    Window Height:

    Measure the inside of the window opening, not the glass. Measure window width in 3 places. Record the shortest measurement and round down to the nearest 1/8 inch. Do not make any deductions, allowances or additions.

    
    

    

    Window Diagonals:

    Measure the inside of the window opening, not the glass. Measure window width in 3 places. Record the shortest measurement and round down to the 1/8 inch. Do not make any deductions, allowances or additions.

    
    

    

    Window Depth:

    Measure from the front of any obstruction to the front edge of the window frame to determine depth. If window has less than 1 ¼” of depth clearance, an Outside Mount is recommended. Do not make any deductions, allowances or additions.

    
    

    NOTE:

    Depth clearance is the minimum window depth required for shutters to operate without interfering with window parts. Shutters can be mounted anywhere within a frame as necessary, as long as there is adequate window depth and flat surface area. Window obstructions include, but are not limited to: Window Cranks, Window Locks, Alarms and other items.

    
    

    

    Window Trim:

    If your window has molding/trim, measure the flat surface of the molding/trim, from the inside edge to the outer edge, while not including any decorative or raised sections of the trim, commonly found along the outside edge.

    
    

    • Download How to Measure Brochure & Order Forms

      Tech Guide Standard Order Form French Door / By-Pass Cut-Out Template (EN) French Door / By-Pass Cut-Out Template (FR) Specialty Shapes Order Form Compound Mitre Bow Form Compound Mitre Bay Form Track Order Form

• How-to-Install Manuals & Videos

  • How-To Videos

  • Download Tech Guides

    Instructions

• Shutters FAQs

  • • Do I need to hire a professional installer?

      • While you may choose to hire a professional installer our Custom Shutters are a DIY product and can be installed with basic tools and skills. For instructions and videos on how to install, please visit the how to install.

    • What is the difference between all the different frame types?

      • Decorative frames bring style and functionality to your windows. Some frames are designed for inside mount application and attach directly to the inside of the window opening, while outside mount frames are mounted outside the window frame and are attached directly to the wall. Outside mount frames completely cover the window molding. Choosing the right frame is a matter of personal preference as well as the mounting type and depth allowed by your window.

    • What is the difference between louver sizes?

      • Louvered shutters for Levolor Shutters are available in 2 1/2 inches, 3 1/2 inches and 4 1/2 inches. The wider the louver, the wider the space between louvers will be when they're fully open. Louvers measuring 3 1/2 inches provide 56% greater visibility than their smaller counterparts. Similarly, the 4 1/2 inch louvers, known as shutters, provide a view that's 108% more clear than the 2 1/2 inch louvers. In addition to visibility, window depth needs to be considered when selecting a louver size.

    • Do shutters increase the value of my home?

      • Shutters help in two ways. They increase the curb-appeal on any home and likely increase the number of people who will consider purchasing. It's also been estimated that they will increase your homes appraisal value by several percentage points.

    • What are the different parts of a shutter called?

      • • Louvers

        • Louvers are the blades of the shutters, and come in sizes ranging from 2 1/2 to 4 1/2 inches.

        • Tilt Bar

        • The Tilt Bar can be on the front of the shutter (usually centered), or hidden in the rear if using the UltraClearview® hidden rear tilt system. Either way, it controls how you open and close the shutters.

        • Top and bottom rails

        • The Top and Bottom Rails outline the shutters and contain the louvers between them.

        • Divider rail (personal preference)

        • The Divider Rail runs through the center of some shutters, depending on size. When there is a divider rail, the top and bottom louvers operate independently of each other, allowing for the top to be open and the bottom closed, for example. A divider rail can be selected based on preference and is required on shutters that exceed a height of 66”.

        • Frame

        • The Frame surrounds the shutter and finishes off the decorative look of the window.
    • Why don't my shutter stay closed or are difficult to close?

      • LEVOLOR Custom Shutters come with panel locks that are located at the top and bottom of a shutter panel. They are used to keep panels securely closed and can also be used to level the panel.

        • To adjust the Panel Lock system using a flat head screwdriver, #2 Robinson Bit, or a Squarehead Bit to adjust the plungers.
        • Push in on the plunger and rotate clockwise to thread the plunger into the panel or rotate the plunger counterclockwise to extend the plunger.
        
    • How do I clean my shutters?

      • Visit our cleaning and care page.

• Remote Guides

  • Download Remote Manuals

    • Premium 6-Channel Remote Instructions (EN) Basic 3-Channel Remote Instructions (EN) Basic 3-Channel Remote Instructions (FR)

• Tech Specs

  • To view more technical information on Shutters such as critical dimensions for various configurations download the Technical Guide below.

    For additional information on Shutters and how to order, download the Brochure below and take to your LEVOLOR retailer.

    • Download Tech Guides

      Tech Guide

• Warranty

  • We are committed to delivering reliable products that stand the test of time and back each one up with a Limited Lifetime Warranty.

    ---

    Limited Lifetime Warranty

    LEVOLOR® extends a limited lifetime warranty to the original residential retail purchaser only if the product was properly installed and remains in the original window. The product is covered against manufacturing defects, i.e., a flaw in the product design, materials, or workmanship that causes the product to no longer function and has a limited lifetime warranty. Limited warranty extends for the life of the product defined as 10* years.

    
    

    * 25 years for shutters; 5 years for motorized operating system components (excluding remote); 3 years for vertical vinyl vanes.

    
    

    • Full Warranty Details

      Custom Shutters (EN) Custom Shutters (FR)

      (Download and save warranty card with your proof of purchase)